Actor Scott Cann's 1951 Powerplant Panhead Bobber
Photography and Story by Jim Gianatsis / FastDates.com Calendars

The Choppers that Yaniv Evan builds are one of a kind, hand crafted and very Unique, His store Powerplant Choppers is located in trendy West Hollywood on the corner of Melrose Avenue and Santa Monica Boulevard, right across from the legendary Troubaduor Music Club, right in the crosshairs to movie star and rock 'n' roll royalty. He may only have some ten years experience building and fabricating hot rods and choppers, but Yanif's machines are some of the best in the business. Machines you might only invasion in your wildest dreams. Think the beautiful retro classic custom bikes of famed Japanese builders Shina Kimura and Zero Engineering, but finished to a higher degree.

The beautiful craftsmanship that goes into each Powerplant Chopper, is quickly noticed and appreciated by both unenlightened passersby and experienced builders of talent.
Such as the detailed trim work on the gas tank of Hollywood actor Scott Caan's (Currently stars as "Dano" in the CBS television series Hawaii Five-0, is also known for his recurring role as manager Scott Lavin in the HBO television series Entourage.) early Panhead chopper shown here (Yaniv likes to call all his bikes 'choppers' even though most of his builds feature low bars and minimal rake). Pay attention to all the components, from the original gas and oil caps made out of brass or aluminum, with a knurled edge. To his custom Frames that are shaped with unique curves and shapes, provides for a shorter wheel base and easier handling.

"I actually built this Black & White bike for Scott back in 2006 with inspiration for the styling from the old boardtrack racers," explains Yaniv. "The Panhead powerplant I bought from an old San Francisco Hell's Angel. The frame I found on Ebay, and when it showed up at the shop, I found it was such junk I had to cut and replace much the tubing, redo the brackets and welds, stretch the neck - it might have been easier to builder a new frame from scratch. But this way it just looks right."

"All the parts on the bike are 100% hand built at Powerplant using the highest qualityt new stock brass, stainless or aluminum, and old found objects that I've reworked back to life. The handle bars and exhaust pipes (mostlymade from stainless) are also some of the other extremely unique parts that Powerplant offers as mail order bolt-ons. Not to bore you to death with all kinds of shameless self promoting ." Yaniv smiles.

It eventually took Yaniv some eight months to complete Scott's Blace and White Panhead, from start to finish, but you have to agree the wait was more than worth it! This is one of the most beautiful customs I've ever seen and would love to own, myself. Another of Yaniv's bikes, a 1970 based Shovelhead that's retro-styled like a 1938 Crocker, took Best of Show at the 2012 LA Calendar Motorcycle Show. Scott was gracious enough to let me photograph both these bikes for the next Iron & Lace Calendar, and share Scott's bike with you here in American Iron. Want your own unique Powerplant Chopper? Bikes start at $25,000. You be the judge on the budget, and let him know what you think and want. Then open up your wallet, so you can ride the baddest mother chopper in Tinseltown, and snare the finest groupies known to mankind. Just ask Scott and Yaniv.

POWERPLANT CHOPPERS
7416 Melrose Ave., Los Angeles, CA 90038 • phone 323 . 658 . 6711 • http://powerplantchoppers.com

Powerplant Choppers builder Yaniv Evan at the 2012 LA Calednar Show where he also took 1st Place Pro Builder Class
with this beautiful metal finished custom Flathead.

Return to Iron & Lace Garage Index

 

Jim Gianatsis photographed 'Balck and White' for the 2014 FastDates.com Calendars with models Kinsey Ray (blond) and Sabella Shake (brunette), at the Gianatsis Design Design Studio in Woodland Hills, CA


POWERPLANT CHOPPERS
7416 Melrose Ave.
Los Angeles, CA 90038

phone 323.658.6711
PowerplantChoppers.com




Stats View Code

See "Code" for Getting web stats.
Copy and paste.

Insert at the bottom of each page in code, just after <body>